With a free height of 600 mm between floor and kettle, the contents of the kettle can be emptied into eurobins containers placed on a lifting truck.
The kettles have a hinged lid in stainless steel. All kettles with a stirrer are fitted with a practical inspection hatch and associated lid as standard.
This is used when adding ingredients while the stirrer is operating, e.g. when thickening and is indispensable i most kitchens.
The stirrer in the kettle saves both time and effort, partly because stirring can be performed automatically, but also because more stirring eases the preparation of many dishes.
The integrated stirrer makes it possible to keep the lid closed and keep the heat and steam inside. This reduces energy consumption and steam in the kitchen.
The mixer tool is always accessible and by opening the lid the contents of the kettle can be checked or ingredients added. The scrapers reduce the risk of the food burning and sticking to the kettle sides and eases the cleaning.
The upper rim of the kettle is unheated and insulated. This reduces heat radiation and saves energy, also minimizing the risk of burn to the operator.
This design also ensures that the food does not burn in the kettle spout when the kettle is emptied, which would reduce the quality of the food and cause cleaning to take longer.
The display normally shows the actual temperature of the food, but a keypress gives access to display and alter the temperature setpoint. This is set quickly and precisely to between 1 and 120°C. The heating supply is controlled automatically to ensure that the required food temperature is reached.
Controlling the heating supply according to the food temperature ensures that the required food temperature is achieved and maintained and means that the user only needs to give the kettle minimal attention.
To prevent burning and enable gentle heating, the heating power can be adjusted in dynamic steps from 1 to 9. These steps control the temperature of the inner kettle in relation to the food temperature. If a low value is set, the heating process will be gentle but slow. If a high value is set, it will not be as gentle but it will be faster.
This makes the heating of e.g. milk easy and safe.
3D files available at